ALL THE BEST!!!
AUTOCAD-EC UDAIPUR-08TH OCTOBER 2024
1 / 50
A line shows its dimensions as 14.52 .
what is the precision of this line
2 / 50
which command convert discreate object in polyline
3 / 50
The function of a polar array is to create object
4 / 50
A fillet command is used to produce
5 / 50
How many AutoCAD objects are in a rectangle?
6 / 50
Is 330 degrees same as -30 degrees in a drawing?
7 / 50
The origin of a drawing is at
8 / 50
What is the difference between command Plot and Print
9 / 50
the short key of the circle
10 / 50
What does associative hatch
11 / 50
fillet in various corner can be created simultaneously using which command
12 / 50
How would you select set of objects in a drawing?
13 / 50
Give the full form of CAD
14 / 50
To bring a particular area of the workspace in focus what command should be used
15 / 50
What is the function of the OSNAP command in AutoCAD?
16 / 50
If during the CCW measurement result gives an angle 135 degrees, the same CW angle measured is
17 / 50
A polar array creates new objects____
18 / 50
What file format does AutoCAD use for saving drawings?
19 / 50
what is the minimum allowable no. of layers is an autocad drawing
20 / 50
How long will a line from 0,5 to 5,5 be ________
21 / 50
Polar coordinates are used mostly for drawing_____
22 / 50
How many SNAP points does an object have?
23 / 50
A object can be obtained from a block by using
24 / 50
shortcut for trim command is
25 / 50
Where should you pay attention when you are working with autocad commands?
26 / 50
the input devices in CAD can be divided into
27 / 50
A line 15 mm in length inches at 75 degrees to the x- axis can be represented as
28 / 50
what is the default design workspace in auto cad 2022
29 / 50
what is the shortcut for zoom command
30 / 50
What does the command Wblock
31 / 50
which of the following options can not be used to represent a line
32 / 50
How will you deselect an object while you are selecting set of objects?
33 / 50
What is the difference of two regular 8-gonon, which is one inscribed and another circumscribed circle
34 / 50
Which of the following is NOT a unit of length measurement?
35 / 50
in autocad 2d modelling, which axis is not accessible for drafting
36 / 50
How many points do you need to define for the rectangle command?
37 / 50
If you change the scale list a project that I have started from 1:50 1:10 then
38 / 50
origin of the auto cad drawing space is
39 / 50
Fillet command can be used to obtain_________
40 / 50
what is the command to mirror the drawing to different location in auto cad
41 / 50
The file extension that cannot be accessed by Autocad
42 / 50
what is the special character for Φ in autocad
43 / 50
Objects are rotated around the
44 / 50
is there any difference between command plot and print
45 / 50
Scaling objects make them______
46 / 50
What does AutoCAD stand for?
47 / 50
in auto cad, keyboard shortcut ctrl+0 is used to
48 / 50
How many layers a drawing should have?
49 / 50
a polyline can be broken into individual line and arc using which of the following command
50 / 50
to turn on or turn off the ortho mode in autocad, which of the function key is used