ALL THE BEST!!!
AUTOCAD - HO-AGRA-02ND SEPTEMBER 2024
1 / 50
One disadvantage of using wireframes as opposed to surface or solid models is that
2 / 50
Compared with surface and solid models, wireframe models take
3 / 50
If you change the scale list a project that I have started from 1:50 1:10 then
4 / 50
What is the function of the PEDIT command in AutoCAD?
5 / 50
How can you draw a circle with a specified radius in AutoCAD?
6 / 50
What is the purpose of the FILLET command in AutoCAD?
7 / 50
origin of the auto cad drawing space is
8 / 50
What is the usefulness of viewports?
9 / 50
The shortcut used to save a drawing in AutoCAD,
10 / 50
What is the purpose of the DIMENSION command in AutoCAD?
11 / 50
How can you change the line type in AutoCAD?
12 / 50
Which of the following tool cannot be used to make 2D views from 3D drawing?
13 / 50
How can you create a custom line type in AutoCAD?
14 / 50
Which factor of hatch command you will change to correct the spacing between hatch lines or pattern?
15 / 50
What does associative hatch
16 / 50
Surface models are considered to be more advanced than wireframe models because
17 / 50
What is the difference of two regular 8-gonon, which is one inscribed and another circumscribed circle
18 / 50
An object has how many snaps in AutoCAD?
19 / 50
Print scale 1:100 means that,
20 / 50
the input devices in CAD can be divided into
21 / 50
What is the purpose of the TRIM command in AutoCAD?
22 / 50
What is the primary purpose of layers in AutoCAD?
23 / 50
What is the purpose of the SCALE command in AutoCAD?
24 / 50
the short key of the circle
25 / 50
What does AutoCAD stand for?
26 / 50
what is the minimum allowable no. of layers is an autocad drawing
27 / 50
When in absolute Cartesian coordinates have points A (10.8) and B (6.5), then to make a line from A -> B with relative polar coordinates will write,
28 / 50
The shortcut key to enable snap n AutoCAD,
29 / 50
What is the function of the OSNAP command in AutoCAD?
30 / 50
What file format does AutoCAD use for saving drawings?
31 / 50
How can you create a block in AutoCAD?
32 / 50
What is the purpose of the UCS command in AutoCAD?
33 / 50
The main difference between creating wireframe models and creating 2D objects is that
34 / 50
To avoid surprises when you create a wireframe model, it is a good idea to
35 / 50
What is the difference between command Plot and Print
36 / 50
How many layers a drawing should have?
37 / 50
What is the purpose of the OFFSET command in AutoCAD?
38 / 50
in auto cad, keyboard shortcut ctrl+0 is used to
39 / 50
If during the CCW measurement result gives an angle 135 degrees, the same CW angle measured is
40 / 50
is there any difference between command plot and print
41 / 50
Scaling objects make them______
42 / 50
How do you create an array of objects in AutoCAD?
43 / 50
What does the EXPLODE command do in AutoCAD?
44 / 50
The extension for AutoCAD drawing file is,
45 / 50
What is the purpose of the HATCH command in AutoCAD?
46 / 50
what is the shortcut for zoom command
47 / 50
An animation video in AutoCAD cannot be created in which of the following format?
48 / 50
A line shows its dimensions as 14.52 .
what is the precision of this line
49 / 50
what is the command to mirror the drawing to different location in auto cad
50 / 50
Give the full form of CAD
