ALL THE BEST!!!
AUTOCAD- HO AGRA JAN BATCH3 -01ST MARCH 2025
1 / 50
In order to measure the dimensions of a land, the surveyor uses which of the following system,
2 / 50
WHICH SYMBOL CAN BE USED TO SPECIFY ANGLE FOR MAKING AN INCLINE LINE?
3 / 50
The command used to convert separate entities into a polyline,
4 / 50
IN ISOMETRIC DRAWING, THE DRAWING IS INCLINED ON WHICH ANGLE?
5 / 50
The symbol that shows snap point to the closet point,
6 / 50
An object can be obtained from a block by using,
7 / 50
The file extension that cannot be accessed by AutoCAD,
8 / 50
WHICH TYPES OF DESIGN IS POSSIBLE TO MAKE IN AUTOCAD?
9 / 50
WHAT DO YOU MEAN BY ORTHO MODE IN AUTO CAD?
10 / 50
The position of the camera can be tuned accurately using,
11 / 50
SCALING OBJECTS MAKE THEM?
12 / 50
The maximum number of layers that a drawing can have?
13 / 50
WHICH STATE GRID IS USE TO DESIGN PERSPECTIVE?
14 / 50
Fillet in various corners can be created simultaneously using which command,
15 / 50
The command that is used to convert a block into a drawing object,
16 / 50
The layer that can be deleted from the layer property manager,
17 / 50
Which state grid is used to design perspective?
18 / 50
___________ is the default selection method that AutoCAD uses when the 'Stretch' command is selected:
19 / 50
What is the highest value of layer transparency?
20 / 50
AutoCAD Electrical में "Wiring Diagram" बनाने के लिए कौन सा टूल सबसे उपयुक्त है?
21 / 50
1’-3 ½” is an example of what type of drawing units: ____
22 / 50
WHERE SHOULD YOU PAY ATTENTION WHEN YOU ARE WORKING WINDO WITH AUTOCAD COMMANDS?
23 / 50
AutoCAD में "Array" कमांड का उपयोग किसके लिए किया जाता है?
24 / 50
WHENEVER YOU SAVE A DRAWING A NEW BACKUP FILE IS CREATED WHICH CONTAINS FILE WITHOUT CHANGES WHAT IS THE EXTENSION OF THAT BACKUP FILE?
25 / 50
HOW MANY SNAP POINTS DOES AN OBJECT HAVE?
26 / 50
Which coordinate option can be used to reset the orientation of UCS to its default?
27 / 50
AutoCAD commands can be accessed in,
28 / 50
ln the Array command the ______________ is the sub-option used to create a circular arrangement of objects.
29 / 50
Various methods to access PAN command,
30 / 50
The ___________ control code is used display the diameter symbol.
31 / 50
15.50 is an example of what type of drawing units: ____
32 / 50
What time (according to the clock) are 180 degrees according to the conventional time?
33 / 50
POLLAR ARRAY CREATES NEW OBJECTS?
34 / 50
To print the entire project, you will choose to regulate what to plot
35 / 50
An inclined angle can be produced using which command.
36 / 50
OBJECT ARE ROTATED ARROUND THE?
37 / 50
The hatch pattern used to fil a closed area,
38 / 50
IN CIRCLE COMMAND, WHAT MEANS OF 3P?
39 / 50
In M Line tool editor, symbol tool can be found on which panel?
40 / 50
Plagiostomi angle can be created by which angle,
41 / 50
AutoCAD Electrical में "Project Management" के लिए कौन सा टूल सबसे उपयुक्त है?
42 / 50
The ___________ command lets you automatically hatch an enclosed area by picking inside the area.
43 / 50
AutoCAD Electrical में "Conduit" का प्रतीक क्या होता है?
44 / 50
Command used to create a rectangle 8 units in length and 6 units in width, starting not from the origin,
45 / 50
What is the default design workspace in AutoCAD 2022?
46 / 50
WHAT THE EXTENSION FOR AUTOCAD TEMPLETE FILE IS?
47 / 50
In AutoCAD, polar coordinate is used for creating,
48 / 50
AutoCAD Electrical में "Riser Diagram" का उपयोग किसके लिए किया जाता है?
49 / 50
The function of a polar array is to create object,
50 / 50
IF ATUOCAD IS DISPLAYING LENGTH OF A LINE AS 24.922 THEN WHAT IS THE PRECISION SELECT?
