Online Assessment Platform

7
Created on By Soniya

CNC TURNING-AGRA-JULY 2024

Each question in the quiz is of multiple-choice or "true or false" format. Read each question carefully, and click correct Answer.

The total score for the quiz is based on your responses to all questions.

1 / 50

WHEN A SYSTEM IS CAPABLE OF AUTOMATICALLY ADJUSTING THE SPEED & FEED PARAMETERS ACCORDING TO ACTUAL CUTTING CONDITION THE SYSTEM IS SAID TO HAVE

2 / 50

WHICH MECHANISM REDUCES THE BACK LASH OF CNC LATHE

3 / 50

THE GEOMETRICAL CHARACTERISTICS SYMBOLS FOR FLATNESS

4 / 50

WHAT IS GENERAL SAFETY IN CNC TURNING?

5 / 50

IN MODERN CNC MACHINE TOOLS, THE BACK LASH HAS BEEN ELIMINATED BY

6 / 50

WHAT IS THE ADVANTAGES OF CNC?

7 / 50

HOW THE PART PROGRAMMING MISTAKES CAN BE AVOIDED?

8 / 50

THE MAIN PURPOSEOF A REAMING OPERATION, AS COMPARED TO DRILLING IS TO

9 / 50

WHAT IS THE FULL FORM OF MPG

10 / 50

WHICH OF THE FOLLOWING CODE IS USED FOR TOOL NOSE RADIUS   COMPENSATION LEFT SIDE.

11 / 50

INTERNAL THREADING FORMING OPERATION CALLED----------

12 / 50

IN PCLNR 25 25 M 12, WHAT IS THE MEANING OF FIFTH LETTER, R

13 / 50

IN PCLNR 25 25 M 12, WHAT IS THE MEANING OF 8TH LETTER, M

14 / 50

WHAT IS THE FULL FORM OF MDI

15 / 50

WHICH QUADRANT IN THE CARTESIAN COORDINATE WILL HAVE A POSITIVE VALUE OF BOTH X & Y?

16 / 50

THE GEOMETRICAL CHARACTERISTICS SYMBOLS FOR ANGULARITY

17 / 50

THE PROCESS OF ENLARGING THE HOLE IS ---------

18 / 50

NUMERICAL CONTROL IS

19 / 50

WHICH G CODE DESCRIPTION MAXIMUM SPINDLE SPEED SETTING?

20 / 50

WHAT IS THE POINT ANGLE OF TWIST DRILL

21 / 50

WHICH COMMON WORD ADDRESS USED TO MISCELLANEOUS FUNCTION IN CNC LATHE?

22 / 50

WHICH MODE IS USED FOR AUTOMATICALLY OPERATE CNC TURNING M/C?

23 / 50

THE DEGREE OF CLOSENESS OF THE MEASURED VALUE OF A CERTAIN QUANTITY WITH ITS TRUE VALUE IS KNOWN AS ----------

24 / 50

WHAT IS THE DISADVANTAGES OF NC SYSTEM

25 / 50

1 MICRON EQUAL TO ------------ MM

26 / 50

IN CNMG 12 04 08, WHAT IS THE MEANING OF 6TH LETTER, 04

27 / 50

THE DIMENSION ø2×45*MEANS --------------------

28 / 50

A BLOCK INFORMATION IN A NUMERICAL MACHINE PROGRAM MEANS

29 / 50

IN CNMG 12 04 08, WHAT IS THE MEANING OF 7TH LETTER, 08

30 / 50

HOW MANY DIVISIONS ARE THERE IN MPG

31 / 50

THE POINT ANGLE OF THE TWIST DRILL DEPENDS UPON THE -------------

32 / 50

LEAST COUNT OF A OUT SIDE MICROMETER

33 / 50

WHICH DESCRIBING MACHINE TOOL MOVEMENT IN   CNC?

34 / 50

WHICH CODE DESCRIBES THE AUXILARY FUNCTION OF CNC MACHINE?

35 / 50

WHICH OF THE FOLLOWING CODE IS USED FOR PECK DRILLING CYCLE

36 / 50

IN CNC TURNING MACHINE Z AXIS DEFINES

37 / 50

IN PCLNR 25 25 M 12, WHAT IS THE MEANING OF SECOND LETTER, C

38 / 50

WHICH MATERIAL GRADE TOOLS ARE MORE HARDER,RIGID, WEAR RESISTANCE OF ALL?

39 / 50

LEAST COUNT OF A VERNIER CALLIPER

40 / 50

WHAT IS THE UNIT OF FEED

41 / 50

WHICH OF THE FOLLOWING CODE IS SUITABLE FOR RAPID TRAVERSE?

42 / 50

TO INCREASE THE PRODUCTIVITY, CNC SYSTEM CAN BE INTERFACE WITH

43 / 50

THE COOLANT USED FOR MACHINING CAST IRON WORKPIECE IS

44 / 50

WHICH MOTOR IS USED FOR INDEXING THE TURRETE

45 / 50

WHICH MODE IS USED FOR EXECUTING THE PROGRAMME LINE BY LINE

46 / 50

WHICH TYPE OF CHUCK IS USED IN CNC LATHE?

47 / 50

WHAT IS THE UNIT OF CUTTING SPEED

48 / 50

WHICH GUIDE WAY SEPARATE THE SURFACE CONTACT BETWEEN THE SLIDING PARTS BY THIN LAYER OF FLUID

49 / 50

A TAPER MAY BE DEFINED AS A UNIFOM GRADUAL ---------- ALONG THE LENGTH OF THE JOB

50 / 50

HOW MANY AXES ARE THERE IN CNC TURNING MACHINE?

0%