ALL THE BEST!!!
CNC TURNING-HO AGRA-09TH SEPTEMBER 2024
1 / 50
WHICH TYPE OF CHUCK IS USED IN CNC LATHE?
2 / 50
ROTATION OF TABLE IN A MACHINING CENTER ARROUND AN AXIS PARALLEL TO Y AXIS IS DENOTEDAS-------------
3 / 50
WHAT IS THE FULL FORM OF MDI
4 / 50
THE DIMENSION ø2×45*MEANS --------------------
5 / 50
WHICH OF THE FOLLOWING CODE IS USED FOR ZX PLANE SELECTION
6 / 50
WHICH COMMON WORD ADDRESS USED TO MISCELLANEOUS FUNCTION IN CNC LATHE?
7 / 50
WHICH ONE OF THE FOLLOWING IS POSSIBLE IN EDIT MODE
8 / 50
WHICH OF THE FOLLOWING CODE IS USED FOR MAIN PROGRAMME END & REWIND
9 / 50
WHICH INSTRUMENT IS USED FOR MEASURING THE SURFACE ROUGHNESS OF A MACHINED COMPONENT?
10 / 50
WHAT IS GENERAL SAFETY IN CNC TURNING?
11 / 50
WHICH MODE IS USED FOR FIVE POSITIONING ( MICRON LEVEL) OF THE AXIS MOVEMENT?
12 / 50
IN PCLNR 25 25 M 12, WHAT IS THE MEANING OF 1ST LETTER, P
13 / 50
5 MICRON EQUAL TO ------------ MM
14 / 50
WHICH OF THE FOLLOWING CODE IS USED FOR XY PLANE SELECTION
15 / 50
IN PCLNR 25 25 M 12, WHAT IS THE MEANING OF FIFTH LETTER, R
16 / 50
IN CNMG 12 04 08, WHAT IS THE MEANING OF 2ND LETTER, N
17 / 50
WHAT IS THE FULL FORM OF MPG
18 / 50
WHICH OF THE FOLLOWING CODE IS USED FOR PECK DRILLING CYCLE
19 / 50
WHICH OF THE FOLLOWING M CODE IS SUITABLE FOR SPINDLE ROTATION STOP
20 / 50
A NUMBER OF TOOLS CAN BE STORED AND BROUGHT INTO OPERATION IN A CNC MACHINE USING AN-----------
21 / 50
WHICH MODE IS USED FOR AUTOMATICALLY OPERATE CNC TURNING M/C?
22 / 50
POINT TO POINT SYSTEMS ARE USED FOR
23 / 50
LEAST COUNT OF A VERNIER CALLIPER
24 / 50
25 / 50
THE GEOMETRICAL CHARACTERISTICS SYMBOLS FOR FLATNESS
26 / 50
A DEVICE FOR HOLDING MORE THAN ONE WORK PIECE SO THAT THEY CAN BE POSITIONED ONE AFTER ANOTHER FOR MACHINING IS CALLED AN -----------
27 / 50
INTERNAL THREADING FORMING OPERATION CALLED----------
28 / 50
A CNC LATHE WHICH CAN ALSO PERFORM MILING OPERATION IS CALLED -----------
29 / 50
THE GEOMETRICAL CHARACTERISTICS SYMBOLS FOR PERPENDICULARITY
30 / 50
A TAPER MAY BE DEFINED AS A UNIFOM GRADUAL ---------- ALONG THE LENGTH OF THE JOB
31 / 50
THE MAIN PURPOSEOF A REAMING OPERATION, AS COMPARED TO DRILLING IS TO
32 / 50
THE GEOMETRICAL CHARACTERISTICS SYMBOLS FOR ANGULARITY
33 / 50
WHICH MODE IS USED FOR EXECUTING THE PROGRAMME LINE BY LINE
34 / 50
---------- ARE USED IN A CNC MACHINE IN PLACE OF CONVENTIONAL LEAD SCREWS FOR FAST & ACCURATE MOTION.
35 / 50
TWIST DRILL IS --------------- TYPE OF CUTTING TOOL
36 / 50
WHO IS THE FATHER OF CNC?
37 / 50
IN CNC SYSTEMS MULTIPLE MICROPROCESSORS & PROGRAMMABLE LOGIC CONTROLLERS WORK--------
38 / 50
SENDING STATUS INFORMATION TO THE CNC SYSTEM FOR CONTINUOUS MONITORING WITH RESPECT TO THE COMMANDED VALUE IS CALLED-----------
39 / 50
IN CNC TURNING MACHINE Z AXIS DEFINE
40 / 50
IN PCLNR 25 25 M 12, WHAT IS THE MEANING OF 8TH LETTER, M
41 / 50
THE PROCESS OF ENLARGING THE HOLE IS ---------
42 / 50
WHAT IS THE INDICATION OF X AXIS IN CNC LATHE MACHINE.?
43 / 50
THE DEGREE OF CLOSENESS OF THE MEASURED VALUE OF A CERTAIN QUANTITY WITH ITS TRUE VALUE IS KNOWN AS ----------
44 / 50
HOW MANY DIVISIONS ARE THERE IN MPG
45 / 50
LEAST COUNT OF A VERNIER HEIGHT GAUGE
46 / 50
WHICH POINT IN ANY CNC MACHINE THE POSITION MEASURING SYSTEM HAS A STARTING POINT TO EACH AXIS.
47 / 50
THE DEPTH THAT THE TOOL IS PLUNGED IN TO THE SURFACE IS CALLED AS --------------
48 / 50
ANTIFRICTION/HYDROSTATIC GUIDE WAYS ARE USED IN A CNC MACHINE TO IMPROVE THE ---------OF THE SYSTEM TO MOTION COMMAND
49 / 50
WHAT IS THE FULL FORM OF CNC
50 / 50
WHICH OF THE FOLLOWING CODE IS USED FOR FLOOD COOLANT ON
