ALL THE BEST!!!
EC MADURAI AUTOCAD FEB BATCH2-17TH APRIL 2025
1 / 50
If you change the scale list a project that I have started from 1:50 1:10 then,
2 / 50
POLAR CORDINATE ARE USED MOSTLY FOR DRAWING?
3 / 50
POLAR CORDINATE IS USED MOSTLY FOR DRAWING.
4 / 50
Isometric drawing is:
5 / 50
6 / 50
Is the polar coordinate display of 2.750 units at an angle of 90° from the last point.
7 / 50
The purpose of the viewpoint presets dialog is:
8 / 50
In order to measure the dimensions of a land, the surveyor uses which of the following system,
9 / 50
A Boolean operation that is used to select interfering region between solids,
10 / 50
The command line abbreviation for the circle tool is:
11 / 50
What are the differences between line ans polyline.
12 / 50
The Design Center is :
13 / 50
A line 4mm in length inclined at 75 degrees to the x- axis can be represented as,
14 / 50
Which of the following statements is correct?
15 / 50
OBJECT ARE ROTATED ARROUND THE?
16 / 50
POLLAR ARRAY CREATES NEW OBJECTS?
17 / 50
When a layer is turned off:
18 / 50
Shortcut for Trim command is,
19 / 50
SCALING OBJECTS MAKE THEM?
20 / 50
In AutoCAD 2D Modelling, which axis is not accessible for drafting?
21 / 50
Fillet in various corners can be created simultaneously using which command,
22 / 50
IN ISOMETRIC DRAWING, THE DRAWING IS INCLINED ON WHICH ANGLE?
23 / 50
When copying a drawing constructed in Autocad 2007 using the copy command from the edit drop-down menu, the drawing can be pasted into documents being worked in other applications. The method of copying and pasting makes use of:
24 / 50
When entering absolute coordinate numbers at the command line, the coordinates are preceded by:
25 / 50
From which of the following toolbars can the mass properties tool be called?
26 / 50
27 / 50
WHENEVER YOU SAVE A DRAWING A NEW BACKUP FILE IS CREATED WHICH CONTAINS FILE WITHOUT CHANGES WHAT IS THE EXTENSION OF THAT BACKUP FILE?
28 / 50
Before viewing positions can be set from the viewpoint preset dialog the set variable UCSFOLLOW must first be set:
29 / 50
When a drawing is saved as an EPS file and the EPS file is inserted into a document being worked in another application:
30 / 50
In first angle orthographic projection an end view is:
31 / 50
The arc tool can be called by entering the following abbreviation at the command line:
32 / 50
AUTO CAD WAS FIRST INTRODUCED IN?
33 / 50
When constructing 3D model drawings in multiple viewport
34 / 50
What command allows us to select objects based on some status?
35 / 50
WHERE SHOULD YOU PAY ATTENTION WHEN YOU ARE WORKING WINDOW WITH AUTOCAD COMMANDS?
36 / 50
The function of a polar array is to create object,
37 / 50
WHICH STATE GRID IS USE TO DESIGN PERSPECTIVE?
38 / 50
The command used to convert separate entities into a polyline,
39 / 50
When constructing 3D model drawings in multiple viewports:
40 / 50
In third angle orthographic projection a plan is:
41 / 50
42 / 50
Which of the following is correct?
43 / 50
WHAT THE EXTENSION FOR AUTOCAD TEMPLETE FILE IS?
44 / 50
WHAT IS THE DIFFERENCE BETWEEN LINE AND POLYLINE ?
45 / 50
HOW MANY SNAP POINTS DOES AN OBJECT HAVE?
46 / 50
Is it possible to construct a polar array from a 3D solid model drawing using the array tool from the modify toolbar?
47 / 50
The key F9 toggles on/off:
48 / 50
If a layer is locked:
49 / 50
The command that is used to convert a block into a drawing object,
50 / 50
