ALL THE BEST!!!
EC UDAIPUR AUTOCAD APRIL-29TH MAY 2025
1 / 50
What time (according to the clock) are 180 degrees according to the conventional time?
2 / 50
IN ISOMETRIC DRAWING, THE DRAWING IS INCLINED ON WHICH ANGLE?
3 / 50
WHAT THE EXTENSION FOR AUTOCAD TEMPLETE FILE IS?
4 / 50
The command used to convert separate entities into a polyline,
5 / 50
The command that is used to convert a block into a drawing object,
6 / 50
WHERE SHOULD YOU PAY ATTENTION WHEN YOU ARE WORKING WINDOW WITH AUTOCAD COMMANDS?
7 / 50
WHAT IS THE DIFFERENCE BETWEEN LINE AND POLYLINE ?
8 / 50
An inclined angle can be produced using which command.
9 / 50
Command used to create a rectangle 8 units in length and 6 units in width, starting not from the origin,
10 / 50
AUTO CAD WAS FIRST INTRODUCED IN?
11 / 50
POLLAR ARRAY CREATES NEW OBJECTS?
12 / 50
WHICH STATE GRID IS USE TO DESIGN PERSPECTIVE?
13 / 50
WHAT DO YOU MEAN BY ORTHO MODE IN AUTO CAD?
14 / 50
WHENEVER YOU SAVE A DRAWING A NEW BACKUP FILE IS CREATED WHICH CONTAINS FILE WITHOUT CHANGES WHAT IS THE EXTENSION OF THAT BACKUP FILE?
15 / 50
The control code is used display the diameter symbol.
16 / 50
The position of the camera can be tuned accurately using,
17 / 50
What is the default design workspace in AutoCAD 2022?
18 / 50
AutoCAD commands can be accessed in,
19 / 50
The hatch pattern used to fil a closed area,
20 / 50
Various methods to access PAN command,
21 / 50
In order to measure the dimensions of a land, the surveyor uses which of the following system,
22 / 50
External references (xrefs) can be descrived as:
23 / 50
Fillet in various corners can be created simultaneously using which command,
24 / 50
OBJECT ARE ROTATED ARROUND THE?
25 / 50
The reason for saving an AutoCAD drawing as a DXF file is:
26 / 50
The symbol that shows snap point to the closet point,
27 / 50
In M Line tool editor, symbol tool can be found on which panel?
28 / 50
When a drawing is save as an EPS file and the EPS file is inserted into a document being worked in another application:
29 / 50
HOW MANY SNAP POINTS DOES AN OBJECT HAVE?
30 / 50
Plagiostomi angle can be created by which angle,
31 / 50
What is the highest value of layer transparency?
32 / 50
Which files with the following file name extensions are “raster” files?
33 / 50
POLAR CORDINATE ARE USED MOSTLY FOR DRAWING?
34 / 50
When copying a drawing constructed in autocad 2007 using the copy command from the edit drop-down menu, drawing can be pasted into documents being worked in other applications. The method of copying and pasting makes use of:
35 / 50
To print the entire project, you will choose to regulate what to plot
36 / 50
WHICH FUNCTION KEY ENABLES OBJECT SNAP IN AUTOCAD?
37 / 50
TO CHANGE A BLOCK INTO NORMAL DRAWING OBJECT WHICH COMMAND?
38 / 50
An object can be obtained from a block by using,
39 / 50
Which coordinate option can be used to reset the orientation of UCS to its default?
40 / 50
SCALING OBJECTS MAKE THEM?
41 / 50
Which state grid is used to design perspective?
42 / 50
When constructing 3D model drawings in multiple viewports:
43 / 50
The file extension that cannot be accessed by AutoCAD,
44 / 50
The function of a polar array is to create object,
45 / 50
IN CIRCLE COMMAND, WHAT MEANS OF 3P?
46 / 50
WHICH SYMBOL CAN BE USED TO SPECIFY ANGLE FOR MAKING AN INCLINE LINE?
47 / 50
In AutoCAD, polar coordinate is used for creating,
48 / 50
Before viewing positions can be set from the viewpoint preset dialog the set variable UCSFOLLOW must first be set:
49 / 50
The maximum number of layers that a drawing can have?
50 / 50
The layer that can be deleted from the layer property manager,
