ALL THE BEST!!!
HO AGRA TECHNICIAN CNC MACHINING -05TH MAY 2025
1 / 50
In CNC programme the letter “O” indicates---------------
2 / 50
During milling, the cutter usually moves
3 / 50
IN PROGRAMME “S” indicates -------------------------
4 / 50
The slot mill cutter is having number of flutes as----------------
5 / 50
In CNC program G77 P01-10 P02 10 P03-1 P04 200 P05 50 P06 400, G77 represents
6 / 50
End mill cutter get blunt due to
7 / 50
Following milling machine is used to cut gears
8 / 50
In up milling the thickness of chip is
9 / 50
More depth of cut can be used in ----------------- milling process
10 / 50
WHICH OF THE FOLLOWING CODE IS USED FOR TOOL CHANGE
11 / 50
High speed tools usually have
12 / 50
The speed at which the piece advances through the cutter is called ------------
13 / 50
WHICH OF THE FOLLOWING CODE IS USED FOR MAIN PROGRAMME END & REWIND
14 / 50
Which of the following code is used for reaming on CNC
15 / 50
WHICH OF THE FOLLOWING CODE IS USED FOR COOLANT OFF
16 / 50
Soft hammer made up of?
17 / 50
IN PCLNR 25 25 M 12, WHAT IS THE MEANING OF 8TH LETTER, M
18 / 50
Plain milling can be otherwise called as
19 / 50
POINT TO POINT SYSTEMS ARE USED FOR
20 / 50
WHICH OF THE FOLLOWING CODE IS USED FOR CIRCULAR INTERPOLATION CLOCK WISE
21 / 50
What is the material of edge finder?
22 / 50
G56 used for ?
23 / 50
What is the material of spring collet
24 / 50
Which motor is used for coolant purpose?
25 / 50
Coolant used in milling machine is known as
26 / 50
In a block N20 G40 G54 G80 G90 G21 G94: Which code is related to feed ?
27 / 50
In 25H7 form of tolerance H stands for----------
28 / 50
FOR CNC MACHINING SKILLED PART PROGRAMMERS ARE NEEDED
29 / 50
The end mill cutter is used for
30 / 50
Which of these is not a mode of program execution
31 / 50
Tool clamp or declamp is done --------------mode.
32 / 50
Code for rapid polar movement?
33 / 50
In CNC program G77 P01-10 P02 10 P03-1 P04 200 P05 50 P06 400, P01 represents
34 / 50
Choose the correct programme number-------------------
35 / 50
In CNC turning programmer end block number is----------------------
36 / 50
In the vertical mill , milling cutters are held in the ----------- & -------------------
37 / 50
Keyboard command for POS mode is
38 / 50
The use of coating on milling cutter will increase the -------------- of the tool.
39 / 50
SCALLING OF
40 / 50
IN CNC M80 code represents
41 / 50
In end mill cutter , chips are pulled up the -------------
42 / 50
WHICH OF THE FOLLOWING CODE IS USED FOR XY PLANE SELECTION
43 / 50
G98 L1, L1 stands for?
44 / 50
Which of the following process has lowest cutting speed.
45 / 50
In milling ---------------- is rotating
46 / 50
M19?
47 / 50
Which material is used for milling cutter?
48 / 50
In Turning ------------------- is constant.
49 / 50
How many types of feed rate is being used in programme?
50 / 50
In milling ---------------------- axis are there.
