SOLIDWORKS-EFC-CHENNAI-DATED-06THAUGUST2024 - MSME

Online Assessment Platform

ALL THE BEST!!!

SOLIDWORKS-EFC-CHENNAI-DATED-06THAUGUST2024

1 / 50

Which of the following dialog boxes is displayed when you add an extra dimension to a sketch or add an extra relation that over defines the sketch

over defining

Delete relation

Make dimension driven?

Add Geometric Relations

2 / 50

How can you create relationships between parts within an assembly?

Use relations.

Use constraints.

Use mates.

Use dimensions

3 / 50

You are designing a robotic arm assembly. You want the first link of the arm to be able to rotate about the base, but only a total of 270 degrees from the start point and no further.
How would you achieve this?

Use an Angle mate.

Use a Gear mate.

Use a Mechanical mate.

Use a Limit Angle mate

4 / 50

You want to build a new part within an assembly to ensure in-context relations and dimensions. You also want to save out this part file as its own unique file. After navigating to the Assembly ribbon tab, what do you do next?

Under Insert Components, select New Part to create a new in-context part. Right-click the new part and select Save Selection

Select Insert Component to create a new in-context part. Right-click te new part and select Save Part (in External File)

Under Insert Components, select New Part to create a new in-context part. Right-click the new part and select Save Part (in External File)

Under Insert Component, select Part to create a new in-context part. Right-click the new part and select isolate

5 / 50

Which of the following tool is used to fully define a sketch

Smart Dimension

None

both a and b

Fully Defined Sketch

6 / 50

How can you rename a feature?

Select the feature name and press F5 key, or double-click the feature name

Select the feature name and press F7, or quick-double-click the feature name

Select the feature name and press F2, or slow-double-click the feature name

Select the feature name and press F3 key, or right-click the feature name

7 / 50

If a feature tool is not working what is the most likely issue?

The Sketch is not fully Defined

There is an no error in the sketch

The process is going to cause the software to think too much

The sketch is not labeled properly

8 / 50

How can you change the size of a toolbox screw in an assembly?

Edit the screw part and add a scale feature using only the required axes.

D) Open the screw part, then manually adjust the dimensions and save as a copy.

Right-click the component and select Edit Toolbox Component.

Toolbox part sizes cannot be changed once added. You have to delete the screw and then readd one of the correct size

9 / 50

When using the Fillet tool, what does the Tanget Propagation option do?

It creates a fillet that is tanget to the direction of view

It creates a fillet that varies in size, depending on local tangency

It extends the fillet to all faces that are tangent to the selected face

It creates a constant-size fillet around all selections

10 / 50

Using Auto dimension in drawing mode can create dimensions in which styles?

chain and baseline

baseline and ordinate

ordinate and chain

chain and linear

11 / 50

What are the most necessary dimension for a drawing that would be included in almost every object?

Height, Tallness, Highness

Height, Width, Depth

Across, width, wideness

Height, Width, across

12 / 50

You want to enlarge your current design by 3%. What tool would you use?

Extrude

Scale

Truncate

Loft

13 / 50

What type of view is used to show a portion of some parent view, usually at an enlarged scale?

section view

detail view

break view

auxiliary view

14 / 50

What is required to create a new 2D sketch?

any existing geometry

any existing plane or planar face

any existing plane or curved face

any planar or curved surface

15 / 50

How can you reattach a broken reference in a derived split part?

Edit the stock feature at the start of the FeatureManager design tree, then adjust the Defining Stock Part option.

Right-click the filename at the top of the FeatureManager design tree and select Relink Stock Part.

Once derived part references are broken, they cannot be readded. Consider resplitting the part.

Locate the child part using SOLIDWORKS Explorer and select Relink Parent.

16 / 50

Which of the following features an open sketch can be converted

a and b

none

Solid feature

Thin Feature

17 / 50

When a part is created what do you need to create to show someone else how to build your object?

Write out descriptors with text on your object.

Create a drawing

Go back in to sketch mode

Create an assembly

18 / 50

When creating sketches, small boxes show up next to the sketch lines. What are these boxes called?

statuses

relations

locks

check boxes

19 / 50

What is required to create a solid using the Swept Boss/Base tool?

at least two profiles

a sketch

a sketch and an axis of revolution

a profile and a path

20 / 50

If you have to change a features size that was determined in the sketch you should do what

You have to start the whole object over

Delete the feature then edit the sketch

Delete the feature and the sketch and start over

Edit the sketch

21 / 50

You have a single line within a sketch that you would like to split into three separate lines. How can you achieve this?

Use the Split Line tool

Use the Offset Entities tool

Use the Split Entities tool

Use the Split tool

22 / 50

Where do names and company information go on a solid works drawing?

In every corner of the paper

On the object

Title block

You do not want to leave any information about the designer in a drawing

23 / 50

Which statement best describes the term "parametric modeling"?

The dimensions and relations used to create a feature are captured and stored in the model

This type of modeling is often compared to working with modeling clay.

You can simply push and pull the geometry until you arrive at the shape you require.

Dimensions and relations are not captured or stored within the model.

24 / 50

Which of the following buttons is available in the display style of the view heading toolbar

Hidden Lines Removed

Perspective

Shaded

Hidden Lines Visible

25 / 50

Earlier within your part design, you created a sketch. Now you want to make a copy of this sketch to use on a different plane or face. You want to ensure that the two sketches will always be the same, so that if you modify the original sketch, the new sketch is updated to reflect the same changes. How can you achieve this?

Copy and paste the original sketch using Paste Special.

Create a composite sketch.

Copy and paste the original sketch.

Create a derived sketch.

26 / 50

Which of the following Property Managers is displayed on the left of the drawing area when you choose Tools > Sketch Tools > Chamfer from the SOLIDWORKS menus?

Sketching Chamfer

Sketcher Chamfer

Sketch Chamfer

Chamfer

27 / 50

Which choice is an example of an applied feature?

fillet

Revolve

Extrusion

sweep

28 / 50

You notice your sketch is blue. How can you make your sketch fully defined?

Nothing, the sketch is already fully defined.

Add in the additional dimensions or relations.

Add in any additional required features.

Remove any additional dimensions or relations.

29 / 50

Which of the following buttons is used to modify the orientation of the standard view

both

None

Reset Standard Views

Update Standard Views

30 / 50

In an assembly what tool should be used to create connection between different parts?

Connections

Mates

Relations

Glues

31 / 50

which of the following parameters is not displayed in the preview of the model

a and B

Depth

None

Draft Angle

32 / 50

What controls the direction and magnitude of a spline curvature?

inflection point

spline point

spline handle

control point

33 / 50

Which sketch relation can you NOT apply to a rectangle?

Coincident

fix

collinear

concentric

34 / 50

Which choice is not a standard 3D view in SOLIDWORKS?

oblique

Dimetric

trimetric

isometric

35 / 50

-------------------------- is the process of creating sketches of what our minds see

Imaging

Representing

Processing

seeing

36 / 50

The ribbon bar at the top of your SOLIDWORKS screen has disappeared. How can you get it back?

Click View > Toolbars > Task Pane

Click View > Toolbars > Feature Manager

Click View > Toolbars > Motion Manager

Click View > Toolbars > Command Manager

37 / 50

What is required to create a solid using the Extruded Boss/Base tool?

a profile and a path

a sketch and an axis of revolution

a sketch

at least two profiles

38 / 50

If you have multiple parts and want to show how the parts fit together you must create what

That is not possible in solid works.

Draw everything in one part rather than multiple part

An assembly of many parts

A drawing for every part and look back and forth at each to see if it will work

39 / 50

If you are working with ISO standards, which projection method would you most likely be using?

first angle projection

third angle projection

fourth angle projection

second angle projection

40 / 50

What is our primary sensory channel?

Drawing

Hearing

Seeing

Imaging

41 / 50

Which of the following tools is used to create a circular pattern in SOLIDWORKS?

Pattern

None of these

Circular Sketch Pattern

Array

42 / 50

What type of sketch do you need to create a sheet metal part?

an open sketch

an open and closed sketch

a closed sketch

You don't need a sketch to create sheet metal parts.

43 / 50

You have to have one of these to sketch on

corner

plane

Axis

Sphere

Point

44 / 50

Which of the following options is not displayed in the New SOLIDWORKS Document dialog box?

Drawing

Assembly

Sketch

Part

45 / 50

How can you easily visualize parent/child arrows on the Feature Manager design tree?

In the Feature Manager design tree, right-click the top level of the part/assembly and select Dynamic Reference Visualization.

In the Feature Manager design tree, right-click the top level of the part/assembly and select Hide/Show Tree Items.

In the Feature Manager design tree, right-click the top level of the part/assembly and select Show Flat Tree View.

In the Feature Manager design tree, right-click the top level of the part/assembly and select SOLIDWORKS PDM.

46 / 50

Representing a three-dimensional object by a number of two-dimensional views is generally called

object projection

oblique projection

orthographic projection

isometric projection

47 / 50

You have designed a plastic part that you want to split and save in two separate unique parts. You use the Split tool to split the part in half and create the two bodies. What do you do next?

Within the Split tool, select Save as New Files.

Navigate to the Solid Bodies folder, right-click the body name, and select Isolate to save to a new file. Repeat for the other body.

Within the Split tool, click File, double-click the body name, type a name for the new part, and click Save.

Within the Split tool, select Consume Bodies.

48 / 50

In SOLIDWORKS, a polygon is considered as a combination of which of the following entities?

Arcs

Lines

None of these

Splines

49 / 50

You notice that one of the subassemblies in your main assembly is rigid and does not have mobility it should. How can you resolve this issue?

Select the subassembly and then select Make Subassembly Flexible from the context menu

Select the subassembly and then select Make Independent from the context menu

Select the subassembly and then select Edit Assembly from the context menu

Select the subassembly and then select Set Resolved from Lightweight from the context menu

50 / 50

You want to simplify a very large and complex assembly to improve performance while working within it. What should you use?

DFMXpress

Speed Pak

Design Checker

a flexible subassembly