ALL THE BEST!!!
UNIGRAPHICS-LBI JODHPUR- DEC BATCH -20th FEB 2025
1 / 50
Which of the following tools in NX allows you to create a solid model by sweeping a 2D profile along a path?
2 / 50
What is the purpose of Detail View in NX?
3 / 50
What type of modeling is supported in NX software?
4 / 50
Which tool is used to start sketching in Unigraphics NX?
5 / 50
What is the term used for the process of converting a 3D object into a 2D drawing in drafting?
6 / 50
Which of the following is typically shown in an assembly drawing?
7 / 50
In NX, which of the following is used to define how parts are positioned and constrained in an assembly?
8 / 50
What is the purpose of the "Boolean Operations" in NX solid modeling?
9 / 50
What is the purpose of Design Validation in NX?
10 / 50
What is the main purpose of an assembly drawing in engineering?
11 / 50
Which tool in Unigraphics NX is used to check and analyze part tolerances?
12 / 50
What is the purpose of the Trim Tool in Unigraphics NX?
13 / 50
Which of the following is used to create curved surfaces in Unigraphics NX?
14 / 50
In CAD (Computer-Aided Design) drafting, which of the following is a major advantage over manual drafting?
15 / 50
Why are "Undo" and "Redo" used in NX?
16 / 50
Which NX feature is used to create a solid body by revolving a 2D sketch around an axis?
17 / 50
What is the use of the Extrude feature in NX?
18 / 50
What is the purpose of surface modeling in Unigraphics NX?
19 / 50
What is the primary purpose of drafting in engineering?
20 / 50
Which feature is used to apply a tolerance to a part in Unigraphics NX?
21 / 50
What is the Fillet feature used for in Unigraphics NX?
22 / 50
Which tool is used for fillet in Unigraphics NX?
23 / 50
What is the main purpose of a "datum plane" feature in Unigraphics NX?
24 / 50
What is the purpose of Section View in NX?
25 / 50
What is Feature-based Machining used for in NX?
26 / 50
What is the Sweep feature used for in NX?
27 / 50
Which tool is used to create holes in a 3D part?
28 / 50
Which type of line is used to show the boundaries of a sectioned view in orthographic projection?
29 / 50
Which of the following tools is used for creating an assembly in Unigraphics NX?
30 / 50
What is Assembly Sequencing used for in NX?
31 / 50
What does reverse engineering refer to in Unigraphics NX?
32 / 50
What is the file extension used in NX?
33 / 50
Which company developed the Unigraphics NX software?
34 / 50
Which of the following is true about the projection of the views in orthographic projection?
35 / 50
What does the term 'scale' refer to in engineering drawings?
36 / 50
In Unigraphics NX, which tool is used to create a drawing of a part?
37 / 50
In orthographic projection, the right side view is typically placed to the right of which view?
38 / 50
What does a dimension line represent in an engineering drawing?
39 / 50
What is the purpose of a center line in an engineering drawing?
40 / 50
What is the purpose of using multiple views in orthographic projection?
41 / 50
What is the purpose of the Spline Tool in NX?
42 / 50
What is Unigraphics (NX) primarily used for?
43 / 50
Which of the following is used for creating toolpaths for milling operations?
44 / 50
In an orthographic projection, how many views are typically used to fully represent a 3D object?
45 / 50
Which of the following can be used to check for collisions in an assembly?
46 / 50
Which of the following is a type of surface modeling technique in Unigraphics NX?
47 / 50
When performing a "Fillet" operation on a solid body in NX, what does it do?
48 / 50
Which of the following is used to define an object's dimensions in Unigraphics NX?
49 / 50
What does "interference checking" help to identify in an assembly?
50 / 50
What is the purpose of Boolean operations in NX?
